Dessicant dehumidification, Dehumidifiers & Dehumidification Systems by Bry-Air

Dehumidification Services

Rental Units
24/7 Emergency Service
Preventive Maintainence
Replacement Parts
Scheduled Service, All Brands
Technical Assistance

Applications

Application Library
Condensation Prevention
Corrosion Prevention
Moisture Regain Prevention
Fungus & Mold Prevention
Product Drying
Plastic Resin Drying

Dehumidifier Products

MiniPAC Dehumidifier
VFB Industrial Dehumidifier
Desiccant  Cassettes
Plastic Resin Drying

Bry-Air Systems

Learn more about our plastic resin drying products

Contact Information

Bry-Air Inc.
10793 State Route 37 W
Sunbury, OH 43074

Toll-Free: (877) 379-2479
Phone: (740) 965-2974
Fax: (740) 965-5470
Email: info@bry-air.com

Contact Us

Bry-Air Systems
Plastic Resin Drying Systems
Phone: (740) 522-2175
Email: basystems@alltel.net

Bry-Air Dehumidification Technical Resource Center
Designed to provide specific information on humidity, dehumidification processes, and steps necessary for selecting the appropriate dehumidifier for a specific application.

Get a custom quoteEmail UsLocate a Rep
Download Psychrometric Chart Tool
Home » Applications » Condensation PreventionPrintable Version

Condensation Prevention

Condensation Prevention Image

When cold surfaces are surrounded by moist air, water vapor will condense on the surface if the dew point of the surface is lower than the dew point of the surrounding air.

This phenomenon know as “sweating” often leads to corrosion such as in water treatment plants or during surface preparation and coating of storage tanks in the chemical industry.

Without moisture control, moisture condenses on ice rink surfaces and softens the ice. Injection molding machines often use chilled water to remove the heat from the plastic during forming.Condensation can form on the molds causing disruption in the molding process.

Bry-Air desiccant dehumidifiers are used to blanket the surface with dry air resulting in condensation prevention and economic benefits to the end user. 

Condensation Prevention in the Meat Industry
Unwanted moisture is a problem in nearly all meat processing plants throughout the world.  Dangerous conditions, such as fogging, are the results of unwanted moisture forming on equipment, floors, ceiling, and walls.  Condensation happens in meat and poultry processing plants when warm humid air comes in contact with cooler surfaces such as those found in cut rooms, chiller rooms and packaging rooms.

Increased scrutiny by the USDA has resulted in companies actively searching for cost-effective solutions for fogging, icing, dripping, and other moisture related problems in order to comply with the USDA zero tolerance guidelines, and avoid the dreaded non-compliance report.

Condensation is the problem, and desiccant dehumidification is the solution.  Bry-Air’s desiccant dehumidifiers precisely control the humidity and dew point in the plant so that condensation cannot occur.  Contact our local representative in your area to assist you with your facility needs.  Locate a Rep.

New! Application Papers and Case Studies
Adobe Acrobat PDF Reader required to view each of these. You can download the reader here for free.